Model Cars

Position
Set Descending Direction

Grid List

10 Item(s)

  1. 1:12 Holden VF Sandman Ride Car - Red Bull Livery

    1:12 Holden VF Sandman Ride Car - Red Bull Livery

    $499.00
    Limited Edition Production: Place your order to confirm allocation.

    Project Sandman was the ultimate tribute to a Holden that held a special place in the hearts and minds of Australia’s car-loving population.
    2014 marked the 40th anniversary of the 1974 release of Holden’s Sandman, a special version of its panel van aimed directly at the youth market, a car that perfectly complemented Australia’s beach-bound lifestyle.

    To mark the occasion, Holden-backed Supercars Championship team Triple Eight Race Engineering created the Project Sandman Tribute Edition, revealed on the eve of that year’s Gold Coast 600.
    The project had started in April 2014, Triple Eight working in conjunction with the GM Holden Design Department. On the outside it looked every bit the panel van it paid homage to – right down to a pair of carbon fibre surfboards on the roof!

    But beneath the bodywork lurked a real, pure-bred racing machine. Underpinning the Sandman exterior was one of Triple Eight’s former race cars; in fact, it was the chassis of the very Holden Commodore VF that Jamie Whincup had raced to eight victories during the 2013 championship season!
    “We’re here after six months of development to reveal our secret project and what an honour to be a part of a Tribute Edition Sandman and have it race around the track this weekend,” Whincup said at the time.
    “The heart and soul of the car is a V8 Supercar and it’s an absolute rocket!”
    Despite its retro styling, the former race car had also received a couple of technical upgrades. Gone was the sequential gearshift lever, replaced by paddles on the back of the steering wheel. The throttle cable was also replaced by an F1-inspired electronic fly-by-wire arrangement.

    The original 5.0-litre Supercars-spec engine was also soon replaced by a 5.7-litre unit capable of producing over 700 horsepower, with a range of guests having the opportunity to belt in alongside Triple Eight drivers for hot laps in the impressive beast.

    Overall this famous car of Australian motor racing is shaping up to be a must have and given it will be produced in a limited edition, it’s one that shouldn’t be missed.

    Orders close on 17th July. Stock will be arriving in the 4th Quarter of 2020.

  2. 1:18 Holden VF Sandman Ride Car - Red Bull Livery

    1:18 Holden VF Sandman Ride Car - Red Bull Livery

    $299.00
    Limited Edition Production: Place your order to confirm allocation.

    Project Sandman was the ultimate tribute to a Holden that held a special place in the hearts and minds of Australia’s car-loving population.
    2014 marked the 40th anniversary of the 1974 release of Holden’s Sandman, a special version of its panel van aimed directly at the youth market, a car that perfectly complemented Australia’s beach-bound lifestyle.

    To mark the occasion, Holden-backed Supercars Championship team Triple Eight Race Engineering created the Project Sandman Tribute Edition, revealed on the eve of that year’s Gold Coast 600.
    The project had started in April 2014, Triple Eight working in conjunction with the GM Holden Design Department. On the outside it looked every bit the panel van it paid homage to – right down to a pair of carbon fibre surfboards on the roof!

    But beneath the bodywork lurked a real, pure-bred racing machine. Underpinning the Sandman exterior was one of Triple Eight’s former race cars; in fact, it was the chassis of the very Holden Commodore VF that Jamie Whincup had raced to eight victories during the 2013 championship season!
    “We’re here after six months of development to reveal our secret project and what an honour to be a part of a Tribute Edition Sandman and have it race around the track this weekend,” Whincup said at the time.
    “The heart and soul of the car is a V8 Supercar and it’s an absolute rocket!”
    Despite its retro styling, the former race car had also received a couple of technical upgrades. Gone was the sequential gearshift lever, replaced by paddles on the back of the steering wheel. The throttle cable was also replaced by an F1-inspired electronic fly-by-wire arrangement.

    The original 5.0-litre Supercars-spec engine was also soon replaced by a 5.7-litre unit capable of producing over 700 horsepower, with a range of guests having the opportunity to belt in alongside Triple Eight drivers for hot laps in the impressive beast.

    Overall this famous car of Australian motor racing is shaping up to be a must have and given it will be produced in a limited edition, it’s one that shouldn’t be missed.

    Orders close on 17th July. Stock will be arriving in the 4th Quarter of 2020.

  3. 1:43 Holden VF Sandman Ride Car - Red Bull Livery

    1:43 Holden VF Sandman Ride Car - Red Bull Livery

    $99.00
    Limited Edition Production: Place your order to confirm allocation.

    Project Sandman was the ultimate tribute to a Holden that held a special place in the hearts and minds of Australia’s car-loving population.
    2014 marked the 40th anniversary of the 1974 release of Holden’s Sandman, a special version of its panel van aimed directly at the youth market, a car that perfectly complemented Australia’s beach-bound lifestyle.

    To mark the occasion, Holden-backed Supercars Championship team Triple Eight Race Engineering created the Project Sandman Tribute Edition, revealed on the eve of that year’s Gold Coast 600.
    The project had started in April 2014, Triple Eight working in conjunction with the GM Holden Design Department. On the outside it looked every bit the panel van it paid homage to – right down to a pair of carbon fibre surfboards on the roof!

    But beneath the bodywork lurked a real, pure-bred racing machine. Underpinning the Sandman exterior was one of Triple Eight’s former race cars; in fact, it was the chassis of the very Holden Commodore VF that Jamie Whincup had raced to eight victories during the 2013 championship season!
    “We’re here after six months of development to reveal our secret project and what an honour to be a part of a Tribute Edition Sandman and have it race around the track this weekend,” Whincup said at the time.
    “The heart and soul of the car is a V8 Supercar and it’s an absolute rocket!”
    Despite its retro styling, the former race car had also received a couple of technical upgrades. Gone was the sequential gearshift lever, replaced by paddles on the back of the steering wheel. The throttle cable was also replaced by an F1-inspired electronic fly-by-wire arrangement.

    The original 5.0-litre Supercars-spec engine was also soon replaced by a 5.7-litre unit capable of producing over 700 horsepower, with a range of guests having the opportunity to belt in alongside Triple Eight drivers for hot laps in the impressive beast.

    Overall this famous car of Australian motor racing is shaping up to be a must have and given it will be produced in a limited edition, it’s one that shouldn’t be missed.

    Orders close on 17th July. Stock will be arriving in the 4th Quarter of 2020.

  4. 1:18 Scale 2019 Holden 50th Anniversary Retro Livery  Shane van Gisbergen / Garth Tander

    1:18 Scale 2019 Holden 50th Anniversary Retro Livery Shane van Gisbergen / Garth Tander

    $199.00
    Pre-order your item now to receive from the first drop in mid July 2020.
  5. 1:43 Scale 2019 Holden 50th Anniversary Retro Livery  Jamie Whincup / Craig Lowndes
  6. 1:64 Scale 2019 Holden 50th Anniversary Retro Livery  Jamie Whincup / Craig Lowndes
  7. 1:12 Scale Shane Van Gisbergen 2018 RBHRT Holden ZB Commodore Biante Model car

    1:12 Scale Shane Van Gisbergen 2018 RBHRT Holden ZB Commodore Biante Model car

    $499.00
    The Red Bull Holden Racing Team already unveiled the colours it will carry on the all-new ZB Commodore in the 2018 Virgin Australia Supercars Championship.

    1:12 Scale Shane Vane Gisbergen’s 2018 Red Bull Holden Racing Team Holden ZB Commodore Car #97

    This special livery model car has just been announced and is available now to pre-order. It's a great model to add to your collection!
  8. 1:12 Scale Jamie Whincup 2018 RBHRT Holden ZB Commodore Biante Model car

    1:12 Scale Jamie Whincup 2018 RBHRT Holden ZB Commodore Biante Model car

    $499.00
    Bring on the 2018 season! A new year, and a new look!

    The Red Bull Holden Racing Team already unveiled the colours it will carry on the all-new ZB Commodore in the 2018 Virgin Australia Supercars Championship.

    1:12 Scale Jamie Whincup’s 2018 Red Bull Holden Racing Team Holden ZB Commodore Car #1

    This special livery model car has just been announced and is available now to pre-order. It's a great model to add to your collection!
  9. 1:43 #97 SHANE VAN GISBERGEN - MATT CAMPBELL 2017 RBHRT RETRO LIVERY

    1:43 #97 SHANE VAN GISBERGEN - MATT CAMPBELL 2017 RBHRT RETRO LIVERY

    $60.00
    Holden VF Commodore 2017 Sandown Retro Round Livery Shane van Gisbergen & Matt Campbell #97
    This special livery model car has just been announced and is available now to pre-order. It’s a great model to add to your collection!

    Please note, the image shown for this item is an illustration of the car only, not the actual model.
  10. 1:43 Scale 2016 Championship Winner Shane van Gisbergen – RBRA VF Commodore 1:43 Scale 2016 Championship Winner Shane van Gisbergen – RBRA VF Commodore

    1:43 Scale 2016 Championship Winner Shane van Gisbergen – RBRA VF Commodore

    $60.00
    Shane van Gisbergen is the 2016 Australian Supercars Champion and to celebrate we have released his winner model car.
    - Octane Events logo on rear quarter panels
    - Virgin Australia sticker replacing V8 Supercars sticker on rear quarter windows
    - Updated font for 97 on all windows
    - Updated Holden logo on sill panels
    - No V8 Supercars logos on sill panels
    - Coates Hire Sydney 500 event stickers on front doors
    - Virgin Australia signage on front quarter panels
    - Updated Holden logos on front bumper
    - Updated Holden logo on front splitter
    - White Dunlop Sport Maxx logos on tyres
    - Aerial location on roof
    - Fuel inlets on passenger side rear quarter panel
    - Tinted windscreen banner below Autobarn windscreen banner
    - Wings For Life logos on rear bumper
    - Updated Holden logo on rear bumper

    Kindly note that this item is only available within Australia!
Position
Set Descending Direction

Grid List

10 Item(s)